JDSG-4-2 250-450mm karfe bututu ciki bango Rotary yashi ayukan iska mai ƙarfi na'urar
Aikace-aikace
JD SG4-2 jerin bututun a cikin bango sandblaster na'ura ce ta musamman da ke tallafawa kayan aikin sandblasting farashin amfani don tsaftace bututun a bango.Ana iya amfani dashi a aikin hannu, kuma a cikin aikin atomatik idan an sanye shi da wasu na'urori.Aiwatar da pretreatment kafin shafi ga bututun ciki bango a cikin ciki diamita kewayon 250mm-450mm a cikin man fetur, sinadaran, jirgin ruwa, da dai sauransu masana'antu.
Siffar
1.JDSG4-2 Sandblaster ana amfani dashi azaman kayan aiki na tallafi don wasu manyan kayan fashewar yashi don tsaftace bangon bututun ciki, kuma ana iya sarrafa shi da hannu ko ta atomatik.
2.The aiki ka'idar JD SG4-2 ne canza harbi kwana na abrasive rafi ta yin amfani da mazugi siffar ayukan iska mai ƙarfi shugaban ko Rotary ayukan iska mai ƙarfi kai don tsaftace ciki bango na bututun.Tsarin yana da sauƙi kuma mai sauƙi don kiyayewa.
3.Babban sassa suna amfani da kayan da aka shigo da su, galibi suna haɓaka rayuwar injin da rage yawan farashin amfani ga abokan ciniki.
4.Matsayin tsafta ya kai Sa2.5-Sa3.
Ƙa'idar aiki
Lokacin tsaftace bangon ciki na bututu, wajibi ne don saita injin ciyar da yashi da iska.
compressor tare da isasshen iska.Tushen fashewar yashi na injin fashewar yashi yana da alaƙa da mai tsabtace bango na ciki na bututu, kuma ana tura manajan zuwa saman bututun don tsaftace aikin.
The kayan aiki ne da yin amfani da yashi ayukan iska mai ƙarfi inji matsa lamba aika daga cikin iska abrasive gauraye kwarara, fesa zuwa bututu ciki bango mai tsabta mazugi bututun ƙarfe, sabõda haka, abrasive jagora don samar da wani mazugi siffar diffusion, don haka kamar yadda tasiri da bututu ciki bango. don cimma manufar bututu na ciki bango tsaftacewa.
Magana
1.JD SG4-2 jerin ne na musamman goyon bayan na'urar ga JD matsa lamba sandblasting inji.
2. Daidaita matakin matsewar haɗin gwiwa ta waje ta hanyar daidaita saurin juzu'i na mariƙin bututun ƙarfe.Kuma gudun ya kamata a sarrafa a cikin 30 ~ 500r / min.
3.Idan mariƙin bututun ƙarfe ya daina jujjuyawa ko jujjuyawa a hankali, yana iya zama saboda matsin lamba, matsewar haɗin gwiwa da yawa, makale bearings ko bututun ƙarfe.Dakatar da injin, sannan daidaita kuma duba.
4. Kafin aiki, bututu a cikin bango ya kamata a sanya shi a bango daga wannan gefe zuwa wancan, kuma busassun iska dole ne a shiga.Lokacin aiki, ya kamata a ciro bututu mai hurawa a hankali don fitar da shi cikin sauri akai-akai.Idan ingancin tsaftacewa ba zai iya biyan buƙatun ba, sake yin aiki don samun sakamako mai gamsarwa.
5. Idan an toshe abrasives kuma ba za a iya fesa ba, ya kamata a rufe shi da farko kuma a shayar da shi, sannan a yi rajistan.6).Ya kamata a duba sassan kayan sawa da sauri akai-akai, yakamata a maye gurbinsu akan lokaci idan an sawa, ko kuma za su yi mummunan tasiri akan inganci da ingancin fashewar, kuma wataƙila ƙyalli na kawo haɗari.
Siffofin fasaha
| Bindigan Bututu Sandblasting Gun | |
| Samfura | Saukewa: JDSG-4-2 |
| Mai | Lantarki |
| Amfani | Kwantena / Kwalban Tsabtace |
| Tsarin Tsaftacewa | Abrasive |
| Nau'in Tsaftacewa | Mai tsabtace matsa lamba |
| Masana'antu masu dacewa | Shuka Masana'antu, Shagunan Gyaran Injiniya, Dillali, Ayyukan Gina, Makamashi & Ma'adinai |
| Girman Injin Wuta | 200X500mm |
| Max.Girman Abrasive | 2mm ku |
| Amfani da iska | 6m3/min |
| Dace da bututun ciki bango Dia | 250mm-450mm |
| Matsin Aiki | 0.5-0.8 mpa |
| Nauyi (kg) | 10 |
| Kayan abu | Tungsten Carbide/Boron Carbide |
| An gabatar da fasali | Processing 250-450mm bututu, Ƙananan da haske, tare da anti-yashi zane na sako-sako da yashi shugaban, na iya zama 360-digiri yashi ayukan iska mai ƙarfi magani, saurin tsaftacewa mai sauri, akwai manyan maɓalli biyu manya da ƙanana |
Rukunin samfuran
